Hitachi Relion RES670 Commissioning Manual page 43

1MRK 511 409-UUS Rev. K
IEC13000060 V1 EN-US
Figure 6:
5. Select Use the following IP address and define IP address and Subnet mask if the front port is
used and if the IP address is not set to be obtained automatically by the IED,see
address must be different from the IP address chosen for the IED.
IEC13000062 V1 EN-US
Figure 7:
6. Use the ping command to verify connectivity with the IED.
7. Close all open windows and start PCM600.
Phasor measurement unit RES670
Commissioning manual
IEC13000060-1-en.vsd
Select the TCP/IPv4 protocol and open Properties
IEC13000062-1-en.vsd
Select: Use the following IP address
© 2017 - 2022 Hitachi Energy. All rights reserved
Section 4
Starting up
Figure 7. The IP
37