Install or replace a BGW320-505 indoor ONT
Replace a BGW320-505 indoor ONT
12
Verify the ONT LEDs, voltage status, and optical signal levels; see the Nokia ONT/CPE
Hardware and Cabling Installation Guide.
13
Activate and test the services by connecting to your device (cell phone, laptop, or computer)
and access a well known web-site.
14
If necessary, reset the ONT.
a. Locate the Reset button on a BGW320-505 indoor ONT as shown in
505 ONT connections" (p.
b. Press the Reset button for less than 10 seconds to reboot the ONT.
Press the Reset button for 10 seconds to reset the ONT to its factory defaults.
E
ND OF STEPS
42
40).
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-47753-AAAA-TCZZA
BGW320-505
Figure 4-2, "BGW320-
June 2022
Issue 3