Safety Standards Compliance - Nokia ONT BGW320-505 Product Manual

ANSI ONT safety guidelines

Safety standards compliance

CAUTION
Service Disruption
Possibility of service interruption.
Service interruption.
The Caution box indicates that the described activity or situation may, or will, cause service
interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood and met.
The following is an example of the Note box.
Note: Information of special interest.
The Note box provides information that assists the personnel working with ONTs. It does not
provide safety-related instructions.
2.1.2 Safety-related labels
The ONT equipment is labeled with specific safety compliance information and instructions that are
related to a variant of the ONT. Observe the instructions on the safety labels.
The following table provides examples of the text in the various ONT safety labels.
Table 2-1 Safety labels
Description
CE marking
2.2 Safety standards compliance
This section describes the ONT compliance with North American safety standards.
WARNING
Equipment Damage
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
2.2.1 EMC, EMI, and ESD standards compliance
The ONT equipment complies with the following requirements:
• Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Subpart C, and
Subpart E, Class A requirements for OLT equipment
• EN 61000-4-4 Testing and measurement techniques - Electrical fast transient/burst immunity test
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
14
Label text
There are various CE symbols for CE compliance.
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-47753-AAAA-TCZZA
BGW320-505
June 2022
Issue 3