Lubrication
Greasing the Machine
Grease Type: General-purpose grease.
Note:
Remove the blue protection caps, if applicable, before greasing and replace when
finished.
1. Park the machine on a level surface and engage the parking brake.
2. Shut off the engine and allow the engine to cool.
3. Clean the grease fittings with a rag.
4. Connect a grease gun to each fitting.
5. Pump grease into the fittings until grease begins to ooze out of the bearings
(approximately 3 pumps).
6. Wipe up any excess grease.
3461-433A
G376192
Page 5–6
Maintenance: Lubrication