Table of Contents
Advertisement
Raising the Hopper without Power
1. Remove any material from the hopper.
2. Raise the machine and support it using jack stands rated for the weight of the machine.
3. Place a large drain pan under the hopper lift
cylinder.
4. Remove the access panel.
5. Disconnect the hose fittings in the manifold
block and allow the fluid to drain into the pan.
Note:
recycling center.
6. Use a hoist or have 2 people hold up the
hopper and install the cylinder lock.
7. After making repairs, install the hoses to the
manifold block fittings.
8. Add hydraulic fluid.
9. Remove and store the cylinder lock.
Operation: After Operation
Dispose of the used fluid at a certified
G384891
G384893
G384892
Page 4–10
3461-433 A
Advertisement
Table of Contents
