Toshiba e-studio 191F Operating Instructions Manual page 161

Plain paper facsimile
Hide thumbs Also See for e-studio 191F:
Table of Contents

Advertisement

12
No.
Parameter
163
ROUTING HEADER
164
IFAX XMT HEADER
(Email only)
168
CC/BCC STATION
169
DHCP CLIENT
170
SMTP AUTHENTI.
(See Note 2)
171
POP BEFORE SMTP
(See Note 2)
172
DIRECT IFAX XMT
173
DELIVERY NOTICE
(HOME)
NOTE
1. The setting numbers marked with an asterisk (*) indicate the factory default setting.
2. "2:Valid" can be selected when the SMTP server or the POP server support these capabilities.
Continued on the next page...
*1
Invalid
Selecting whether to add the Header Print information of the
Routing Station on the top edge of each routed pages.
2
Valid
*1
Included
Selecting whether to include the header when sending a
document to an addressee in the same Domain as specified
2
Not included
in the Default Domain parameter. (This is useful when using
the machine to scan documents back to your PC)
Note: When sending to a Domain other than as
*1
Invalid
Selecting whether to allow the CC/BCC Email address(es) to
be entered.
2
Valid
1
Invalid
Select whether the machine would automatically acquire the
Network Parameters from the DHCP Server. (Such as IP
*2
Valid
Address, Subnet Mask, Default Gateway IP Address, etc.)
Note: If you change the setting of this parameter, the
*1
Invalid
If you transmit to the SMTP server, the user name and
password are used for authentication. Selecting "2:Valid"
2
Valid
allows you to set up the user name and password.
*1
Invalid
If you transmit to the SMTP server, POP User Name and POP
Password are used for authentication.
2
Valid
*1
Invalid
Selecting whether to be prompted during Phone Book
registration if the station you are programming is to receive
2
Valid
Internet Fax directly without going through a Mail Server.
*1
Off
Setting the home position of whether to request a Message
Disposition Notification (MDN) for a delivery processing
2
On
confirmation indicating that the message (Email) was read,
when sending an Email/Internet Fax.
This setting will be the default value for the Select Mode
(Function 8-2 (DELIVERY NOTICE)).
Customizing Your Machine
specified in the Default Domain parameter, the
header will be included regardless of the
selection.
machine will reboot automatically.
161

Advertisement

Table of Contents
loading

Table of Contents