Table of Contents
Advertisement
Setting the Internet Parameters
28
DEFAULT DOMAIN
29-38 SELECTABLE DOMAIN
(01) ~ (10)
39
REMOTE PASSWORD
40
RELAY XMT PASSWORD
41
MANAGER'S EMAIL ADDR Department Manager's Email Address for notification of all Internet relayed
42-51 RELAY DOMAIN
(01) ~ (10)
52
COMMUNITY NAME (1)
53
COMMUNITY NAME (2)
54
DEVICE NAME
55
DEVICE LOCATION
56-65 AUTH DOMAIN
(01) ~ (10)
66
IPv6 LINK-LOCAL ADDR
67
IPv6 ADDRESS
68
IPv6 DEFAULT ROUTER
69
IPv6 PRI. DNS SERVER
70
IPv6 SEC. DNS SERVER
71
KEY OPERATOR
ID CODE
123
NOTE
1. Please set No.6 (IP ADDRESS) and No.7 (SUBNET MASK) to use Network features.
2. Register up to 10 Domain Names that are authorized to use your machine for Relayed XMT Requests. (If the Domain
Name fields are left blank, anyone can access your machine for Relayed XMT)
3. The User Parameter numbers will not be shown on the LCD display.
136
Parameter
When the outgoing Email address is incomplete by SMTP standards, the
Frequently Sent Domain specified here will be automatically added to the Email
Address. This feature is also useful as a shortcut when manually entering Email
Addresses to a frequently used domain (up to 50 characters).
Enter up to 10 Domain Names that can be selected using the
Manual Email Addressing (up to 30 characters).
This is a security password that allows Remote Programming of the Internet
Parameters and Auto Dialer or the retrieval of the Journal via an Email (up to 10
characters).
The password that provides network security for your Relay Station used
exclusively for G3 relay purposes (up to 10 characters).
transmissions for supervision and cost control purposes (up to 60 characters).
Enter up to 10 Domain Names that have been authorized to access your machine
for Relayed Transmission Request (up to 30 characters).
Relay Domain, a.k.a. Domain Name in your machine.
Selects whether to change the Community Name(1) SNMP (up to 32 characters).
Enables read only.
Selects whether to change the Community Name(2) SNMP (up to 32 characters).
Enables read/write.
Inputs the Device Name when required (up to 32 characters).
(For Status Monitor / EtherTalk Machine Name)
Inputs the device name when required (up to 32 characters).
(For Status Monitor)
Input Domain Names for authentication.
Displays the Link-Local Address.
The IP Address of your machine.
Inputs the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx",
where "xxxx" is a hexadecimal value.
Press
Available when Fax Parameter No.187 (IPv6 AUTO CONFIG) is "1:Invalid".
The IP Address of the Default Router.
Inputs the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx",
where "xxxx" is a hexadecimal value.
Press
Available when Fax Parameter No.187 (IPv6 AUTO CONFIG) is "1:Invalid".
The IP Address of the DNS Server for IPv6 environment.
Available when Fax Parameter No.161 (DNS SERVER) is "2:Valid".
The IP Address of the 2nd DNS Server for IPv6 environment.
Available when Fax Parameter No.161 (DNS SERVER) is "2:Valid".
Inputs the Key Operator ID CODE.
ENTER ID =XXXXXXXX
Comments
to enter a colon (represented by a ":").
to enter a colon (represented by a ":").
during
Advertisement
Table of Contents
