Toshiba e-studio 191F Operating Instructions Manual page 156

Customizing Your Machine
1
No.
053 SUB-ADDRESS PSWD
054 FAX FORWARD
056 COVER SHEET
058 LANGUAGE
065 PRINT COLLATION
077 DEPARTMENT CODE
082 QUICK MEMORY XMT
088
LINE SELECTION
097 SPECIAL TRAY
No.1
NOTE
1. The setting numbers marked with an asterisk (*) indicate the factory default setting.
156
Parameter
*1
2
*1
2
*1
2
3
1
*2
*1
2
1
*2
*1
2
3
*1
2
3
(-----) Setting a password (up to 20 digits) for secured sub-address
communication.
Invalid Selecting whether the machine performs Fax Forwarding to
the specified destination.
Valid
Off Setting the home position of the Cover Sheet parameter in the
Select Mode. (See page 48)
On
A-ENGLISH Selects the default message language for the display.
C-FRENCH
SPANISH
Invalid Selecting whether the machine prints out documents in
sequence. (See page 31)
Valid
Invalid Selecting whether the machine performs the Department
Code operation.
Valid
Invalid Selecting whether the machine performs Quick Memory
XMT.
Valid
Invalid:
Stores all documents into memory first before dialing the
telephone number.
Valid:
Starts dialing the telephone number immediately after storing
the first page.
This feature is not available when the Fax Parameter
No.133 (JOB BUILD) is set to "2:On".
Auto Selecting the transmitting telephone line when the optional
G3 Communication Port Kit is installed.
Line-1
Line-2
Auto:
Selects the available telephone line for transmission
automatically.
Line-1:
Selects Line-1 as the only transmitting telephone line.
Line-2:
Selects Line-2 as the only transmitting telephone line.
Note: Regardless of the setting selection above, the
unit will answer and receive on both telephone
lines.
None Select a Special Tray that will not be used for printing received
faxes (Tray 1 or 2 ). One Tray must always be available for
Tray 1
receiving faxes. This setting is available when the optional 2nd
Tray2
Paper Feed Module is installed.