Connections With Other Devices - Panasonic AV-HS410E Operating Instructions Manual

Installation and connections
w Connections with other devices
p
q Block diagram
p
SDI IN
1 to 4
SDI Input
1 to 8
SDI IN
5 to 8
DVI-D IN
DVI-D Input
Input
A1, A2
Input
B1, B2
Memory card
~ AC IN
Computer
*1: W hen external synchronization is selected as the reference signal
setting, the reference signal is input.
When internal synchronization is selected, the reference signal is
output.
*2: W hen external synchronization is selected as the reference signal
setting, the signals are looped through and output.
When internal synchronization is selected, the reference signal is
output.
Black
FS
Color
BKGD1, 2
VPrc
ColorBar
DbyD
STILL1, 2
CLIP1, 2
FS
UC
VPrc
DbyD
Input
matrix
Scaler
AC/DC Power
TALLY/GPI 1 TALLY/GPI 2
Dsub 15 Dsub 15
GPI-IN: 8
GPI-OUT: 19
ALARM OUT: 1
GND: 2
Aux panel Remote camera
BKGD
CUT, MIX, WIPE, DVE
KEY
CUT, MIX, WIPE, DVE
PinP1, 2
CUT, MIX
DSK Output
CUT, MIX matrix
FTB
AUX 1 to 4
Multi View
WFM
MEM PVW
Option slot A
Option slot B
LAN
RJ45 Dsub 9
(*4)
Switching
(*5)
hub
*3: T wo sets of the same output signals are distributed from
SDI OUTPUT 1.
*4: U se a crossover cable when connecting the unit and another
device on a 1:1 basis without going through a switching hub.
*5: U se a switching hub.
P roceed with the connections after reading the section entitled
"Network security" (on page 8).
16
SDI OUTPUT
SDI Output
1-1, 1-2
1-1, 1-2 (*3)
SDI OUTPUT
SDI Output
2 to 5
2 to 5
DVI-D OUT
DVI-D Output
Scaler
Output
A1, A2
Output
B1, B2
Reference signal
REF IN/OUT (*1)
REF OUT (*2)
COM EDITOR
Dsub 9
Editing controller
Aux panel
VTR, etc.