Panasonic AV-HS410E Operating Instructions Manual page 15

Installation and connections
1 Turn off the power of the unit, and disconnect the power cable.
2 Loosen the two screws of SLOT A or SLOT B at the back of the unit, and remove the blank panel.
3 Align the option board with the guide rails, and insert it slowly.
Insert it until it will go no further. Take care not to exert excessive force while doing this since that may damage the connector
inside.
4 Mount the option board in place using the two screws.
Clamping torque: 0.7 N•m
5 After connecting the necessary cables, plug the power cable into the power outlet, and turn on the power.
(Be sure to ask your dealer.)
Blank panel
Screw
S
U T
T P
O U
L O G
N A
I / A
D V P r
P b
Y
Screw
15
SLOT B
SLOT A
Screw
I- I
D V
Screw