Table of Contents
Advertisement
Chapter 2 Useful Features
5.6.5
Others
(1) Clear Configuration
Use this feature to clear configuration information. From the TOP menu, select Controller Management, and
then Clear Config to clear all configuration information.
If old configuration information for the physical device remains, configuration may fail. In this case, execute
Clear Config.
Note
(2) Place Drive Online
Use this feature to forcibly put a failing physical device online.
From the TOP menu, select Drive Management, select Select Drive Operations, and confirm that the target
physical device is displayed for Select Drive. Select Drive Operation, Place Drive Online, and then Start
Operation. When a confirmation message is displayed, select Yes, and then select OK.
(3) Rebuild Rate
Use this feature to specify the rebuild rate.
From the TOP menu, select Controller Management, Change Controller Properties, and Rebuild Rate.
The available value is between 0% and 100%. The default value (recommended) is 30%.
Select Apply Changes and, when a confirmation message is displayed, select OK.
(4) Physical device information
Use this feature to display physical device information.
From the TOP menu, select Drive Management and then View Drive Properties, and then select Select
Drive to select the physical device you want to check.
To remove a virtual drive, select Virtual Drive Management, Select Virtual Drive
Management, and confirm that the virtual drive you want to delete is displayed for Select
Virtual Drive. Select Delete Virtual Drive. When a confirmation message is displayed,
select Yes, and then select OK.
Express5800/R120f-1E Maintenance Guide
5. RAID System Configuration
161
Advertisement
Table of Contents
