Table of Contents
Advertisement
Program 150 - PLU Group Assignment
Each PLU may report to any three of 20 groups. Group totals appear on reports, so that you can track
sales of different types of items. A group can also be used to designate items that are to print on an
optional kitchen printer. The first of the three groups to which a PLU can be assigned determines
kitchen printer routing.
Note: The PLU will report to group "1", if not programmed to report to another group.
ER 5215 Electronic Cash Register
1. Turn the control lock to the P position.
2.
To begin the program, enter 1 5 0, press the SBTL key.
1
5
0
3.
Select the PLU or PLUs you wish to program in one of the following ways:
Press a PLU key on the keyboard, or
PLU
If sequential PLUs are to receive the same status, press the first PLU key and then
press the last PLU key, or
PLU
PLU
Enter the number of the PLU and press the PLU key, or
Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU key.
4.
Enter up to three 2-digit numbers representing the groups where you wish to add the
PLUs sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four. Press the X/TIME
key.
st
nd
1
Group
2
Group
5.
To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
PLU
PLU
X/TIME
rd
3
Group
PLU
P-Mode Programming • 97
Advertisement
Table of Contents
