Table of Contents
Advertisement
Keyboard Legend
CHECK
CHECK CASHING
CHECK ENDORSEMENT
CHARGE (1-8)
CHECK #
CLEAR
CLERK
CONV (1-4)
DETAIL FEED
18 • Operations
Description
Use to finalize check sales. Calculates the sale total including tax,
finalizes the sale, and opens the cash drawer. Change computation is
allowed by entering an amount before pressing the CHECK key. The
cash drawer will open only if the amount tendered is equal to or greater
than the total amount of the sale. Change issued will be subtracted from
the cash-in-drawer total.
Use to exchange a check for cash. Cash-in-drawer and check-in-drawer
totals are adjusted.
Use to print a check endorsement message on an optional slip printer. See
"Programming the Receipt/Check Endorsement Message" on page 148
to program an endorsement message.
Use to finalize charge sales. Calculates the sale total including tax,
finalizes the sale, and opens the cash drawer. Change computation is
allowed by entering an amount before pressing the CHARGE key. The
cash drawer will open only if the amount tendered is equal to or greater
than the total amount of the sale. Change issued will be subtracted from
the cash-in-drawer total.
The CHECK # key is used to begin a new, or access an existing
balance (hard check) or itemized bill (soft check).
Check track numbers that are entered manually may be set at a fixed
length of one to nine digits. Check track numbers assigned
automatically will begin with #1.
Existing checks are accessed by entering the check track number and
pressing the CHECK # key.
Use to clear entries made into the 10 key numeric pad or X/TIME key
before they are printed. Also used to clear error conditions.
The register will not operate in register mode unless a clerk has been
signed on. Direct or secret code sign on procedures accomplishes clerk
sign-on.
All entries made on the register will report to one of the 10 clerk totals.
When a clerk is signed on, all entries following will add to that clerk's
total until another clerk is signed on.
To sign a clerk off, enter 0 (zero) and then press the CLERK key. The
"CLOSEd" message displays. The register cannot be operated until
another clerk is signed on. The current clerk must first be signed off
before another clerk may be signed on.
The currency conversion function, allowed after subtotal, converts and
displays the new subtotal at a preprogrammed exchange rate. Tendering is
allowed after using the currency conversion function. Change is
calculated and issued in home currency. The amount of foreign currency
tendered is stored in a separate total on the Financial report, but not added
to the drawer total.
Advances the detail paper one line, or continuously until the key is
released.
ER 5215 Electronic Cash Register
Advertisement
Table of Contents
