Table of Contents
Advertisement
Clerk Programming
Clerks (which may be used as cashiers), have the following programming options. These options are
set through separate programs:
Before attempting any programming, all clerks must first be signed off in REG mode.
Program 800 - Secret Code Programming
ER 5215 Electronic Cash Register
Program 800 - Secret Code programming determines the code that is used for clerk sign on
if a code entry sign on method is selected in system option #2 (See "System Option
Programming" on page 105.)
Program 801 - If a second cash drawer is installed, Drawer Assignment determines which
cash drawer will be opened for each.
Program 810 - Clerk Descriptor Programming allows you to set a unique, up to 12
character, descriptor for each clerk
1.
Turn the control lock to the P position.
2.
To begin the program, enter 8 0 0, press the SBTL key.
8
0
0
3.
Enter the number (1-10) of the clerk you wish to program; press the X/TIME key.
X/TIME
4.
Enter a secret code (up to 6 digits); press the SBTL key.
Enter the secret
code, up to 6
digits
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize
the program.
CASH
SBTL
SBTL
P-Mode Programming • 143
Advertisement
Table of Contents
