Mount The Hp Netserver On The Slides - HP NetServer LXr 8500 Installation Manual

Chapter 4

Mount the HP NetServer on the Slides

1. Verify that both slides are fully extended from the rack, as shown in
Figure 4-2.
Extended
Slide Members
Figure 4-2. Lifting the Server Onto the Slide Members
2. Using at least two people, lift the HP NetServer by using the lifting handles
on each side. Move the HP NetServer in between the extended slide
members and position it so that the handles are resting on the slide
members, as shown in Figure 4-2 and Figure 4-3.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Lifting Handles
(2 more on other side)
Installing into the Rack
35