Install The Cage Nuts; Adjust The Slides - HP NetServer LXr 8500 Installation Manual

Chapter 3

Install the Cage Nuts

Once you have marked the twelve holes, install a supplied cage nut in each
marked hole on all columns, as shown in Figure 3-2.

Adjust the Slides

Prepare both slides for mounting, as shown in Figure 3-3:
Screws
Figure 3-3. Adjusting the Rear Flange on the Slide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Cage Nut
Column
Figure 3-2. Installing Cage Nuts
Rear Flange
Front Flange
Extendible Members
Preparing the Rack
31