Inspecting And Replacing Anode(S) - Yamaha FL200C Owner's Manual

Maintenance
6. Put the outboard motor in a vertical posi-
tion. Using a flexible or pressurized filling
device, inject the gear oil into the gear oil
drain screw hole.
Recommended gear oil:
YAMALUBE outboard gear oil or Hyp-
oid gear oil
Recommended gear oil grade:
SAE 90 API GL-4
Gear oil quantity:
F225CET 0.920 L (0.972 US qt,
0.810 Imp.qt)
7. Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
8. Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw.
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
78
9. Securely install the cooling water inlet
covers on both sides of the gear case us-
ing the bolt and nut removed earlier.
Tightening torque:
2.0 Nm (0.20 kgf-m, 1.5 ft-lb)
EMU29317

Inspecting and replacing anode(s)

Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
ECM00721
NOTICE
Do not paint anodes, as this would render
them ineffective.