1
SET
1. Set button
2. Mode button
9
8
1. Tachometer
2. Water detection-alert indicator
3. Engine trouble alert/maintenance indicator
4. Trim meter
5. Multifunction display
6. Battery voltage
7. Cooling water/engine temperature
8. Oil pressure (4-stroke models)
9. Cooling water pressure
EMU36111
Start-up checks
Place the remote control lever in neutral and
turn the main switch to "
displays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the water
separator-alert indicator blinks, consult your
Yamaha dealer immediately.
MODE
ZMU08035
1
2 3 4
7 6
ZMU08034
" (on). After all the
Instruments and indicators
TIP:
To stop the buzzer, press the "
"
" (mode) button.
EMU36131
Low oil pressure-alert
If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatically
2
decrease to about 2000 r/min.
5
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indica-
tor blinks. Check the engine oil quantity and
replenish oil if necessary. If the alert device
has activated while the appropriate engine oil
quantity is maintained, consult your Yamaha
dealer.
ECM01602
NOTICE
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
" (set) or
ZMU05430
ZMU05431
31