Overheat Alert; Water Separator Alert; Engine Trouble Alert - Yamaha FL200C Owner's Manual

Instruments and indicators
EMU36222

Overheat alert

If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01593
NOTICE
 Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
 Do not continue to operate the engine if
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
32
EMU36151

Water separator alert

This indicator will blink if water has accumu-
lated in the water separator (fuel filter) while
cruising. In such an event, stop the engine
immediately and see page 85 of this manual
to drain the water from the fuel filter. Get back
to the port soon and consult a Yamaha dealer
immediately.
ZMU05421
ZMU05422
ECM00911
NOTICE
Gasoline mixed with water could cause
damage to the engine.
EMU36161

Engine trouble alert

This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port
soon and consult a Yamaha dealer immedi-
ately.
ZMU05423
ZMU05424