Table of Contents
Advertisement
QUICK START GUIDE
Information: Controller Basic Operation
View and change system parameters from the factory defaults via
A) Controller Display
B) Craft Port on front of controller using a laptop with EasyView2 software or HyperTerminal.
EasyView2 (GUI) software can be downloaded from
C) J5 LAN port web pages using a laptop with browser. LAN port Server mode is for local laptop connection. Set
the LAN port to Server:
Controller Alarm Status: The display changes colors; Green = Normal, Amber = Minor Alarm, Red = Critical/Major
Alarm
Some alarms may occur during initial installation; eg: thermal probe fail or Major/Minor communication fail .
Clear these alarms: Via Controller Display: follow the menu path;
Menu > Control/Operation > Clear Events or Uninstall Equipment.
Verify Basic Installation Settings: Date, Time, Battery Type, number of strings and float voltage
Menu > Configuration > System Settings and Menu > Configuration > Batteries.
Front Panel
View and change system parameters from the factory defaults via the front panel:
The main menu can be accessed using the Menu / Enter button
The basic menu structure for navigation is shown below:
Page 11
© 2021 ABB. All rights reserved.
abbpowerconversion.com
Controller Front Panel Display and Controls
Front Panel Menu Structure - Overview
Infinity S_Dual V_old_QSG
Version 4.0
Advertisement
Table of Contents
