Mitsubishi Electric 800 Series Instruction Manual page 21

3.
Be careful not to bend the pins of the inverter's control circuit connector, insert the control terminal option and fix it with
the installation screw.
(Tightening torque: 0.33 to 0.40 N·m)
4.
Install the inverter front cover.
(Refer to the FR-E800 Instruction Manual (Connection) for instructions to install the cover.)
NOTE
• The inverter recognizes the control terminal option when the state of the power supply is changed from OFF to ON.
Tighten the screw.
INSTALLATION AND WIRING
2
21