Blomberg LWF28442B User Manual page 43

Problem
Foam is overflowing from
the detergent drawer.
Laundry remains wet at the
end of the programme. (*)
(*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to
prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and re-
spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A
CAUTION:
section, consult your dealer or an Authorised Service Agent. Never try to repair a nonfunctional
product yourself.
43 / EN
Reason
Too much detergent is used.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
If you cannot eliminate the problem although you follow the instructions in this
Solution
• Mix 1 tablespoonful softener and
½ l water and pour into the main
wash compartment of the detergent
drawer.
• Put detergent into the product
suitable for the programmes and
maximum loads indicated in the "4.6.2
Programme and consumption table".
When you use additional chemicals
(stain removers, bleaches and etc),
reduce the amount of detergent.
• Use recommended amount of
detergent.
Washing Machine /User's Manual