Advertisement

Quick Links

Washing Machine
User manual
LWF284421G

Advertisement

Table of Contents
loading

Summary of Contents for Blomberg LWF284421G

  • Page 1 Washing Machine User manual LWF284421G...
  • Page 2 Please read these instructions first before using your appliance Dear Customer, Thank you for choosing a Blomberg appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
  • Page 3: General Safety Instructions

    1 General safety instructions • While there is still water inside the product, never open the This section includes security loading door or remove the filter. instructions which may help prevent Otherwise, risk of flooding and the injuries and material damage risks. injury from hot water will occur.
  • Page 4: Children's Safety

    1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •...
  • Page 5: Important Instructions For Environment

    2. Important instructions for DANGER! environment • Plug the product into a 2.1 Compliance with WEEE Directive grounded outlet protected by This product complies with EU a 16 A fuse. Do not neglect to WEEE Directive (2012/19/EU). This product bears a classification have the grounding installation symbol for waste electrical and made by a qualified electrician.
  • Page 6: Technical Specifications

    2200 Main model code 1011 Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Blomberg LWF284421G Model name 7174142700 Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh)
  • Page 7: Appropriate Installation Location

    4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1 Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2 Remove the transport safety bolts by the place of installation is under customer's turning them slightly.
  • Page 8: Connecting The Drain Hose To The Drain

    • In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. • To prevent the waste water to go back into the machine again and to ensure easy drainage, do not immerse the end of the 1 Tighten the nuts of the hose by hand.
  • Page 9: Electrical Connection

    4.1.7 Electrical connection The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need Connect the product to a grounded outlet to be replaced an ASTA approved BS1362 protected by a 13 A fuse. Our company shall fuse of the same rating must be used.
  • Page 10 4.2 Preparation Transportation of the product 1. Unplug the product before transporting it. 4.2.1 Sorting the laundry 2. Remove water drain and water supply * Sort laundry according to type of fabric, connections. color, and degree of soiling and allowable 3.
  • Page 11: Loading The Laundry

    • Operate the product in the highest The detergent drawer capacity allowed by the programme you have selected, but do not overload; see, is composed of three "Programme and consumption table". See, compartments: “Programme and consumption table" – (1) for prewash • Always follow the instructions on the – (2) for main wash detergent packaging.
  • Page 12 • Do not use amounts exceeding the dosage going to use the Delayed Start function, do quantities recommended on the detergent not use liquid detergent. package to avoid problems of excessive Using gel and tablet detergent foam, poor rinsing, financial savings and • If the gel detergent thickness is fluidal and finally, environmental protection.
  • Page 13: Tips For Efficient Washing

    4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woolens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC)
  • Page 14: Operating The Product

    4.3 Operating the product 19 - Spin speed selection LEDs 20 - Duration information display 4.3.1 Control panel 21 - Child lock enabled LED 20 21 22 23 24 22 - End Time Setting button 23 - Door lock enabled LED 24 - Programme follow-up indicator LEDs 25 - On / Off button 26 - Start / Pause button 27 - Auxiliary function buttons 28 - Spin speed adjustment button 29 - Temperature adjustment button 17 - Programme selection knob...
  • Page 15: Temperature Selection

    • Hygiene+ • Jeans Use this programme for your laundry for Use this programme to wash clothes such as which you require an anti-allergic and hygienic trousers, jackets, vests, etc., made of denim. washing at high temperature with intensive and Lower mechanical movement in washing long washing cycle.
  • Page 16: Programme And Consumption Table

    If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. The programme resumes. Water is drained, laundry is spun and the programme is completed. INFORMATION • If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause mode.
  • Page 17 where no auxiliary function can be selected, the ** “Cotton eco 40°C and Cotton eco light of the relevant auxiliary function will flash. 60°C are standard programmes.” These programmes are known as INFORMATION ‘40°C cotton standard programme’ and ‘60°C cotton standard • Some functions cannot be selected programme’ and indicated with the together. If a second auxiliary function symbols on the panel.
  • Page 18 4.3.8 End Time INFORMATION With the End Time function, the startup of the programme may be delayed up to • If no programme is started or no key 24 hours. After pressing End Time button, is pressed within 1-10 minute during the programme's estimated ending time is programme selection process, the displayed.
  • Page 19 4.3.11.3 Adding or taking out laundry INFORMATION 1. Press the Start / Pause button to switch the machine to pause mode. The programme • If you press On / Off button when follow-up light of the relevant step during the Child Lock is enabled, the which the machine was switched into the programme will not be cancelled.
  • Page 20: Maintenance And Cleaning

    4.4 Maintenance and cleaning If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick. Service life of product extends and frequently experienced problems will be reduced if it is INFORMATION cleaned at regular intervals. • Foreign metal substances will cause 4.4.1 Cleaning the detergent drawer rust stains in the drum.
  • Page 21: Draining Remaining Water And Cleaning The Pump Filter

    4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The product has an emergency water draining The filter system in your machine prevents solid items such as buttons, coins and fabric hose, in order to drain the water: fibers clogging the pump impeller during discharge of washing water.
  • Page 22: Troubleshooting

    5 Troubleshooting Loading door cannot be opened. • Door lock is activated because of the water level in the Program does not start after closing the door. machine. >>> Drain the water by running the Pump or • Start / Pause / Cancel button was not pressed. >>> *Press Spin programme.
  • Page 23 Machine does not switch to spinning step. (*) Colour of the clothes faded. (**) • There might be unbalanced load in the machine. >>> • Excessive laundry was loaded in. >>> Do not load the Automatic unbalanced load detection system might be machine in excess.
  • Page 24 Detergent residue in the detergent drawer. (**) Laundry remains wet at the end of the programme. • Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent. • Excessive foam might have occurred and automatic foam •...
  • Page 25 Accidental damage, misuse or abuse of a product. An attempted repair of a product by anyone other than a Blomberg Approved Engineer (the “Engineer”). Installation or use of a product where such installation or use fails to meet the requirements contained in this guarantee or the User Instructions Booklet.
  • Page 26 11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Blomberg offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
  • Page 27 You can register by first visiting blomberguk.com/register and by following the online instructions. All Blomberg appliances come with a 3 year parts and labour guarantee as standard. When you register your appliance for the Optima Inverter Motor 10 year guarantee, you are also registering your appliance for the standard 3 year parts and labour guarantee.
  • Page 28 HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation available should the product require attention under guarantee. Please take a few moments to complete the details below, as you will need this information when you call us, or to use our online services.
  • Page 32 www.blomberginternational.com info@blomberginternational.com Document Number : 2820527405_EN/ 21-03-19.(17:07)

Table of Contents