Pre-Maintenance Procedures; Preparing The Machine For Maintenance; Removing The Seat Assembly; Installing The Seat Assembly - Toro Vista 08924 Vista 08924TC Operator's Manual

Pre-Maintenance
Procedures
Preparing the Machine for
Maintenance
1. Park the machine on a level surface.
2. Ensure that the parking brake is engaged.
3. Shut off the machine and remove the key.
Removing the Seat
Assembly
Lift the seat assembly so that the tabs can slide out
of the frame brackets (Figure
Figure 19
Installing the Seat
Assembly
Slide the seat-assembly tabs into the frame brackets
and lower the seat assembly
19).
g405486
(Figure 20).

Removing the Hood

Lift the hood from the machine as shown in
Important:
Be careful to not damage the
headlight wire-harness connectors while you
remove the hood.
If you need to completely remove the hood
from the machine, disconnect the wire-harness
connectors from the headlights.
27
Figure 20
Figure
Figure 21
g405485
21.
g411834