Charging The Machine; Checking The Fluid Levels And Tire Pressure; Burnishing The Brakes - Toro Vista 08924 Vista 08924TC Operator's Manual

1. Steering shaft
2. Screw
3. Spring
4. Wheel cover
2

Charging the Machine

No Parts Required
Procedure
Charge the machine; refer to
Lithium-Ion Battery Charger (page
Figure 3
5. Wheel clip
6. Locknut
7. Steering wheel
Understanding the
22).
3
Checking the Fluid Levels
and Tire Pressure
No Parts Required
Procedure
1. Check the brake-fluid level before you first start
the machine; refer to
Level (page
2. Check the transaxle-fluid level before you
first start the machine; refer to
Transaxle-Fluid Level (page
3. Check the air pressure in the tires; refer to
Checking the Tire Pressure (page
4

Burnishing the Brakes

g410793
No Parts Required
Procedure
To ensure optimum performance of the brake system,
burnish (break-in) the brakes before use.
1. Bring the machine up to full speed, apply the
brakes to rapidly stop the machine without
locking up the tires.
2. Repeat this procedure 10 times, waiting 1 minute
between stops, to avoid overheating the brakes.
9
Checking the Brake-Fluid
37).
Checking the
36).
17).