Recommended Maintenance Schedule(S) - Toro Vista 08924 Vista 08924TC Operator's Manual

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 100 hours
Before each use or daily
Every 100 hours
Every 250 hours
Every 300 hours
Every 400 hours
Every 500 hours
Every 1,000 hours
Note:
Download a free copy of the electrical schematic by visiting
machine from the Manuals link on the home page.
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems,
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
CAUTION
Only qualified and authorized personnel should maintain, repair, adjust, or inspect the machine.
• Avoid fire hazards and have fire-protection equipment present in the work area. Do not use
an open flame to check fluid levels.
• Do not use open pans of flammable cleaning fluids for cleaning parts.
CAUTION
If you leave the key in the switch, someone could accidently start the machine and seriously
injure you or other bystanders.
Shut off the machine and remove the key from the switch before you perform any maintenance.
Maintenance Procedure
• Perform the breaking in a new machine guidelines.
• Check the tire pressure.
• Check the brake-fluid level. Check the brake-fluid level before you start the machine.
• Wash the machine.
• Check the condition of the tires and rims.
• Torque the wheel-lug nuts.
• Inspect the steering and suspension for loose or damaged components.
• Check the front wheel camber and toe-in.
• Check the brakes.
• Check the transaxle-fluid level.
• Grease the front wheel bearings.
• Replace the service-brake pads.
• Change the transaxle fluid.
• Change the brake fluid.
www.Toro.com
25
and searching for your