Product Overview; Specifications; Attachments/Accessories - Toro 88714 Operator's Manual

Product Overview

1. Cover screw
2. Chain cover
3. Guide bar cover
4. Shaft
5. Oil-tank cap
Figure 5
6. Chain-tensioning screw
7. Chain
8. Guide bar
9. Oil tank
10. Bucking teeth

Specifications

Model
Bar Length (with 88619 and
88621 equipped)
Chain Gauge (with 88619
and 88621 equipped)
Chain Pitch (with 88619 and
88621 equipped)
Chain Length (with 88619
and 88621 equipped)
Rated Voltage
Weight (without a battery)
Charger Type
Battery Type
*If you are using this machine with a battery pack that
is 4.0 Ah or greater, you must install quick-release
harness Model 139-5334 (not included).
Appropriate Temperature Ranges
Charge/store the battery pack
at
Use the battery pack at
g358797
Use the tool at
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous.
11
88714, attaches to 51810T
25.4 cm (10 inches)
0.050 inches
1/4 inch
58 links
60V DC maximum, 54 VDC
nominal usage
4.2 kg (9.3 lbs)
Toro 60V lithium-ion chargers
Toro 60V lithum-ion batteries*
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)*
0°C (32°F) to 49°C (120°F)*