Safety; Safe Operating Practices - Toro 30534N Operator's Manual

Safety

This machine meets or exceeds ANSI B71.4-2004
specifications in effect at the time of production.
Improper use or maintenance by the operator or owner can
result in injury. To reduce the potential for injury, comply
with these safety instructions and always pay attention to the
safety alert symbol, which means Caution, Warning, or
Danger—personal safety instruction. Failure to comply with
the instruction may result in personal injury or death.

Safe Operating Practices

The following instructions are from ANSI B71.4-2004.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
Training
•
Read the Operator's Manual and other training material
carefully. Be familiar with the controls, safety signs, and
the proper use of the equipment.
•
Never allow children or people unfamiliar with these
instructions to use the lawn machine. Local regulations
can restrict the age of the operator.
•
Never mow while people, especially children, or pets are
nearby.
•
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
•
Do not carry passengers.
•
All drivers should seek and obtain professional and
practical instruction. Such instruction should emphasize:
– the need for care and concentration when working
with ride-on machines;
– control of a ride-on machine sliding on a slope will
not be regained by the application of the brake. The
main reasons for loss of control are:
◊ insufficient wheel grip, especially on wet grass;
◊ being driven too fast;
◊ inadequate braking;
◊ the type of machine is unsuitable for its task;
◊ lack of awareness of the effect of ground
conditions, especially slopes;
◊ incorrect load distribution.
Preparation
•
While mowing, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot
or wearing open sandals.
•
Thoroughly inspect the area where the equipment is to
be used and remove all objects which may be thrown by
the machine.
•
Warning—fuel is highly flammable.
– Store fuel in containers specifically designed for this
purpose.
– Refuel outdoors only and do not smoke while
refueling.
– Add fuel before starting the engine. Never remove
the cap of the fuel tank or add fuel while the engine is
running or when the engine is hot.
– If fuel is spilled, do not attempt to start the engine
but move the machine away from the area of spillage
and avoid creating any source of ignition until fuel
vapors have dissipated.
– Replace all fuel tank and container caps securely.
•
Replace faulty silencers/mufflers.
•
Before using, always visually inspect to see that the blades,
blade bolts and cutter assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to
preserve balance.
Operation
•
Be alert, slow down and use caution when making turns.
Look behind and to the side before changing directions.
•
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
•
Mow only in daylight or in good artificial light.
•
Before attempting to start the engine, disengage all blade
attachment clutches and shift into neutral.
•
Remember there is no such thing as a safe slope. Travel
on grass slopes requires particular care. To guard against
overturning:
– do not stop or start suddenly when on a slope;
– use slow speeds on slopes and during tight turns;
– stay alert for humps and hollows and other hidden
hazards;
•
Watch out for traffic when crossing or near roadways.
•
Stop the blades from rotating before crossing surfaces
other than grass.
•
When using any attachments, never direct discharge of
material toward bystanders nor allow anyone near the
machine while in operation.
•
Never operate the machine with damaged guards, shields,
or without safety protective devices in place.
•
Do not change the engine governor settings or overspeed
the engine. Operating the engine at excessive speed may
increase the hazard of personal injury.
•
Before leaving the operator's position:
– disengage the power take-off and lower the
attachments;
– set the parking brake;
4