Table of Contents
Advertisement
Operating the product
C
If a new Programme is selected
by changing the position of the
Programme selection knob while
your machine is in stand-by
mode, the running Programme
ends.
Do not contact the inner surface
of the drum when adding or
removing laundry during a
continuing Programme. The drum
surface is hot.
6.14 Cancelling the Programme
If you want to cancel the Programme and
end the drying operation for any reason after
the machine starts running, press the On/Off
button.
A
As it will be extremely hot inside
the machine when you cancel the
Programme while the machine is
in operation; run the ventilation
Programme to cool it down.
6.15 Programme end
When the Programme ends, the Final/
Wrinkle Prevention, Fiber Filter Cleaning and
Water Tank Warning leds on the Programme
follow up indicator light up. Loading door can
be opened and machine becomes ready for
a second run.
Press the On/Off button to turn off the ma-
chine.
C
In case the laundry is not
removed after the Programme is
completed, the wrinkle prevention
Programme that lasts 2 hours
start in order to prevent wrinkling
of the laundry that remains inside
the machine.
C
Clean the fibre filter after each
drying. (See. „Fibre filter and
loading door inner surface")
C
Empty the water tank after each
drying. (See. „Emptying the water
tank")
26 / EN
Dryer / User Manual
Advertisement
Table of Contents
