Adjusting The Feet; Electrical Connection; Transportation Of The Dryer; Changing The Illumination Lamp - Blomberg LTK 28021 W User Manual

Table of Contents

Advertisement

Installation
1
3
A
Hose connection should be made
in a safe manner. Your house
will be flooded if the hose comes
out of its housing during water
discharge.
C
Water drain hose should be
attached to a height of maximum
80 cm.
C
Make sure that the water drain
hose is not stepped on and it is
not folded between the drain and
the machine.

3.4 Adjusting the feet

In order to ensure that the dryer operates
more silently and vibration-free, it must stand
level and balanced on its feet. Balance the
machine by adjusting the feet.
Turn the feet to left or right until the dryer
stands level and firmly.
C
Never unscrew the adjustable
feet from their housings.
16 / EN
2
4

3.5 Electrical connection

For specific instructions for electrical connec-
tion required during installation (see 1.1.1
Electrical Safety)

3.6 Transportation of the dryer

Unplug the dryer before transporting it.
Drain all water that has remained in the
dryer.
If direct water drain connection is made, then
remove the hose connections.
We recommend carrying the
dryer in upright position. If it
A
is not possible to carry the
machine in the upright position,
we recommend carrying it by
tilting towards the right side
when looked from the front.
3.7 Changing the illumination
lamp
In case an illumination lamp is used in your
laundry dryer
To change the Bulb/LED used for illumination
of your tumble dryer, call your Authorised
Service.
The lamp(s) used in this appliance is not
suitable for household room illumination. The
intended purpose of this lamp is to assist the
user to place laundry in the tumble dryer in a
comfortable way. The lamps used in this aps -
pliance have to withstand extreme physical
conditions such as vibrations and tempera-
tures above 50 °C
Dryer / User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ltk 28031 g

Table of Contents