L Side Cover Assembly Section - JVC GY-HM600U Service Manual

K
Rear
assembly
K
3.1.6 Removing the handle assembly (See Figure 14 and
15)
• Remove the L side cover assembly and R side cover assembly
etc, .
(1) Remove the four screws L attaching the handle assembly,
and then remove the handle assembly.
• When attaching the handle assembly, let two wires from
VF pass to the slit of a frame.
Handle assembly
L
Slit
L
Fig.13
L
Fig.14
Fig.15
3.1.7 Removing the lens unit (See Figure 16 and 17)
• Remove the L side cover assembly and R side cover assembly
etc, .
(1) Remove the five screws M attaching the board bracket,
and then remove the board bracket.
M
Board
bracket
M
(2) Remove the five screws N attaching the lens unit, and then
remove the lens unit.
3.2

L Side cover assembly section

3.2.1 Removing the Grip cover assembly (See Figure 1)
(1) Remove the seven screws A attaching the grip cover as-
sembly, and then remove the grip cover assembly.
A
M
M
Fig.16
N
Lens unit
N
Fig.17
A
Fig.1
(No.HC047<Rev.001>)1-7