Canon imagePRESS Server M10 Service Manual page 68

• If you installed an upgraded version of system software (for example, version 1.0 to version 2.0), contact your authorized
service/support center for a list of valid software patches. Some or all of the patches listed on the Configuration pages
that you printed earlier may no longer be valid. Before installing a patch, be sure to verify with your authorized service/
support center that it is valid for your system version. Installing an invalid patch may result in system corruption.
22. Reconnect any USB devices that you may have removed earlier.
23. If the imagePRESS Server requires a static IP address (for example, in a non-DHCP network environment), work with
the network administrator to configure it (see the Configuration and Setup which is part of the user documentation).
■ Install the system software through network connection
Using the Fiery Installer Builder you can install the system software stored on a network location. All the data on the HDD and
the configuration information will be lost, make sure to create a backup of the data or system configuration.
● To install the system software through the network connection
1. Remove all the USB devices that may be connected to the imagePRESS Server
2. If possible, print the Configuration pages. (see
The Configuration pages contain a list of any installed options and a record of the customer's current Setup configuration.
3. Power on the Windows computer and do the following:
NOTE:
• Start the Fiery Installer Builder.
Double-click the Fiery Installer Builder icon on the desktop or you can also click Start > EFI > Fiery Installer Builder.
• Close all the software applications except the Fiery Installer Builder.
• Make sure that the Windows computer is configured to obtain its IP address automatically (DHCP).
• Remove any network cables between the Windows computer and the customer network.
• Disable all power-save and hibernation settings.
IMPORTANT:
It is important that you complete all of the tasks in the preceding list. If you do not complete these tasks, the installation
may fail.
4. At the Downloaded window of the Fiery Installer Builder, select imagePRESS Server M10 V1.0 .
5. From the Preparation action list, select Perform Network installation.
"Printing the Configuration pages" on page
imagePRESS Server M10 1.0
62
4. INSTALLING SYSTEM SOFTWARE
66)