Installing the Support for Wall-mounted Installation
For floor-mounted installation, the base is 50 mm high. If waterproofing requirements cannot be
met, the battery can be installed on a wall. The mounting kits need to be purchased separately.
For wall- and floor-mounted installation, ensure that the load-bearing capacity meets the
requirements (one battery expansion module weighs 50 kg).
.
Mounting holes
for the 15 kWh
module
Mounting holes
for the 10 kWh
module
Mounting holes
for the 5 kWh
module
Mounting holes for
support
Level
(Optional)
Pack
mounting
holes
Wall
Ground
9
Support