QWIK-PURE
®
10.3.5 Cleaning
10.3.5.1 Warning notices
CAUTION
NOTE
10.3.5.2 Cleaning work
For cleaning work to be carried out, the following prerequisites must be fulfilled and the respective
preparatory tasks must have been completed.
Tools
•
No tool necessary
1.
The QWIK‑PURE
2.
The assembly unit to be cleaned has been dismantled.
3.
Bring the assembly unit to be cleaned to a washing station with an integrated oil separator.
Illustration
98 | 124
Inappropriate cleaning and use of the wrong cleaning media!
Inappropriate cleaning and the use of the wrong cleaning media may result in minor
injuries as well as damage to health and damage to property.
•
Only use warm water to remove stubborn dirt or deposits.
•
Never use abrasive or aggressive cleaning agent or solvents which could damage
the outer coating (e.g. markings, type plate, corrosion protection, etc.).
•
Never clean the device with hard or pointed implements.
•
Use an anti-static, damp cloth for cleaning the outside.
•
Immediately replace any product markings (pictograms, markings) that have
become illegible.
Local hygiene regulations!
In addition to the cleaning instructions listed, any regionally applicable or company-
specific hygiene regulations must be observed.
Prerequisites
•
Warm water
•
Cotton or disposable cloth
Preparatory tasks
has been decommissioned.
®
Material
Description / explanation
Clean measuring chamber
Flush the measuring chamber with warm water.
Installation and operation manual
Protective equipment
Always to be worn: