Schedule Setup; Water Days - Toro EVOLUTION Series Quick Start Manual

Hide thumbs Also See for EVOLUTION Series:
Table of Contents

Advertisement

Step 4 – Connect valves wires to the controller - Secure the valve common wire (white) to either of the two terminals labeled COM. Secure the individual
valve wires to the appropriate zones they control, Zone 1 valve to terminal 1, Zone 2 valve to terminal 2, etc.
Connect master valve/pump relay wires to the controller - Secure the valve common wire (white) to either of the two terminals labeled COM.
Secure the Master Valve or Pump Relay wire to the terminal labeled MV/PUMP.
Caution: To prevent controller damage, do not connect the pump motor starter directly to the controller. Connect sensor wires to the
controller Remove the jumper wire from the SENSORS terminals. Secure the two sensor wires to the sensor terminals. Refer to the provided
sensor instructions for further installation instructions.
Step 5 – Test for proper operation.

Schedule Setup

The EVOLUTION
controller displays only one schedule by default. See the Advanced Functions section of the full User's Guide version to activate additional
®
schedules if needed.
Water Days Setup
The EVOLUTION
controller allows for flexible watering by giving you four schedule options: 7-day, Even days, Odd days or Interval days. By default, the
®
7 day schedule is set for the schedule. To set watering days to Odd, Even or Interval, see the Advanced Functions section.
The 7-day schedule allows you to activate or turn off any of the days in the week. By default, all days are active.
Step 1 – Press the
Step 2 – (For controllers with multiple active schedules only.)
Use the Up
Note: The Schedule and Zone names can be customized using the EVOLUTION
evolution.
Step 3 – Use the Up
Step 4 – Use the Up
Step 5 – (WEEKDAY Option) The WEEKDAY schedule allows you to activate or turn off any of the days in the week. By default, all days are active.
Use the Left
the day for watering. Repeat for all days of the week.
12
SCHEDULES button.
or Down
arrows to select the Schedule you want to edit. Press SELECT
or Down
arrows to navigate to WATER DAYS. Press SELECT
or Down
arrows to select WEEKDAY, ODD, EVEN or INTERVAL. Press SELECT
or Right
arrows to navigate within the days of the week. Use the Up
.
Software which can be accessed at www.toro.com/
®
.
.
or Down
arrows to activate or turn off
WEEKDAY
S
M
T
W
T
F
S
TODAY IS TUESDAY

Advertisement

Table of Contents
loading

Table of Contents