Perfectclean - Miele DGC 5080 XL Operating Instructions Manual

Cleaning and care

PerfectClean

56
The oven interior, side runners, universal tray and combi rack
have a special PerfectClean enamel surface. The
PerfectClean enamel has an iridescent appearance.
PerfectClean surfaces have very good anti-stick properties
and are easy to clean.
However, it is very important to clean the surfaces each time
the appliance is used. The surface will become harder to
clean and the anti-stick properties will deteriorate if soiling is
not removed after each use and allowed to build up.
Soiling such as spilt juices and cake mixtures are best
removed whilst the oven or tray is still warm. Exercise caution,
make sure the oven is not hot - danger of burning.
Spilt fruit juices may cause lasting discolouration of the
surfaces. This discolouration is permanent but will not affect
the efficiency of the enamel.
Remove residual cleaning agent after cleaning. If left it will
reduce the anti-stick properties of the PerfectClean
surfaces.
The following cause lasting damage to the surface
structure and reduce the anti-stick effect and must not be
used on PerfectClean surfaces:
– abrasive cleaning agents, e.g. powder cleaners and cream
cleaners.
– cleaning agents for ceramic hobs,
– ceramic and stainless steel hob cleaners,
– wire wool or metal scourers,
– abrasive sponges, e.g. pot scourers or sponges which
have been previously used with abrasive cleaning agents,
– oven spray must not be used on PerfectClean surfaces
which are hot or left on for too long.
– PerfectClean enamelled items must not be washed in a
dishwasher.
– spot cleaning by rubbing the surface.