Brief Operating Instructions; Filling The Water Container; Selecting A Function; Setting The Temperature / Core Temperature - Miele DGC 5080 XL Operating Instructions Manual

Filling the water container

Selecting a function

Setting the temperature / core temperature

Before each cooking programme ensure that the filter in
the bottom of the cooking compartment is fitted correctly.
Otherwise coarse soiling could get into the drainage
system and cause a blockage.
Make sure you do not touch the appliance door handle
while the panel is opening or closing. Danger of injury.
^ Touch the
=
^ Remove the water container (on the right) and fill it up to at
least the "min" mark.
Only use mains tap water (below 20 °C). Never use
distilled or mineral water or other liquids.
^ Push the water container into the appliance until it
connects.
^ Touch the
=
^ Switch on the appliance with s.
^ If the function displayed is not the one you want, touch one
of the illuminated sensors next to the arrows in the display
until the function you want appears.
^ Touch the sensor beside the function to select it.
^ If you want to use the recommended temperature then
confirm with "OK". If you want to change the temperature,
enter the new temperature with either - / + or the numerical
keypad. Confirm with "OK".

Brief operating instructions

sensor to open the panel.
sensor to close the panel.
29