Configuring Network Using The Network Utility - Canon LX-P1300 User Manual

Chapter 5 Appendix

Configuring Network Using the Network Utility

The following explains how to configure the network using the network utility. How to set the printers search range
and the network's time out value are described below.
Setting the Printers Search Range
■
When searching for this printer, the IP address to be searched for can be specified.
1
From the [Environmetal settings] menu, click [Utility environmetal settings].
Or click on the toolbar.
2
Specify the IP address to search for.
1
2
3
198
1. Check the option [Specify IP Address to
Search].
2. Enter the IP address.
3. Click [Add].
The IP address will be added. Up to 16 IP
addresses can be specified.
To remove an added IP addresses:
Select from the list and click [Delete].
Clicking [Restore default] will restore the content
of the [Search Range] tab to its defaults.