Chapter 3 Maintenance
3
NOTE
• If printing is still faint after the completion of light cleaning, perform strong cleaning
• Cleaning during Printing
You can stop printing temporarily to perform cleaning.
1. Press the pause key.
2. Select [Light Cleaning] or [Strong Cleaning] from the [Cleaning] menu on the status monitor.
116
3. Review the displayed message and then
click [Yes].
Light cleaning begins.
When cleaning is in progress, do not perform
any other operation.
It takes about 2 minutes (For LX-D1300: 4
minutes) to finish the cleaning.
(P.117)