Entry type
1)
Logbook deleted
Cold restart
Update
Load/save parameter set
Date/time change
Reset maint. interval
AutoCal
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
Brief description
Changing the system
configuration
Firmware incompatibil-
ity
Invalid system configu-
ration
-
Information on the date and the cause of a cold restart.
"Message": → Type of message
•
Information on loading of firmware or of configuration files. The display includes information
on the target module, the file type, and the progress of the download.
"Target module": → Target module of the loaded data
•
"Data type":→ Type of loaded data
•
"Status":→ Download status
•
"Module type": → Type of target module
•
"version": → Version of the loaded software
•
"Load/save parameter set": Information on the source and destination of the parameter set
as well as on the success of the process are displayed.
"Parameter set source": → Source of the parameter set
•
"Parameter set target": → Target of the parameter set
•
"Status":→ Status of the the load/save process
•
Manual or automatic changes are logged.
"Daylight saving time": → Mode of summer/winter time switchover
•
"type of change": → Info on whether the change was carried out manually (by the user) or
•
automatically (switchover to summer/winter time)
"Time before change" → Date/time before change
•
"Date before change" → Date/time before change
•
"Reset maintenance interval": Maintenance-interval related information, especially on re-
maining expiration time and on start date of follow-up interval.
"Interval No.": → ID of reset maintenance interval
•
"New expiration time": → Next expiration date (up to set highest message level)
•
"New expiration time": → Next expiration date (up to set highest message level)
•
Information on start and end of an AutoCal process.
6.17 [3.03] Maintenance & Diagnostics > Logbook
"Plug & Measure message": → Type of Plug & Measure mes-
•
sage
"Type of change": → Type of configuration change
•
"Affected module": → ID of the changed module
•
"Module type":→ Type of the changed module
•
"Status": → Synchronization of the parameters
•
"Plug & Measure message": → Type of Plug & Measure mes-
•
sage
"Affected module": → ID of the incompatible module
•
"Incompatible module type": → Type of the incompatible mod-
•
ule
"Expected firmware version": → Expected firmware version
•
"Plug & Measure message": → Type of Plug & Measure mes-
•
sage
Functions
211