Samsung OfficeServ 7100 Technical Manual page 43

OfficeServ 7100
TECHNICAL MANUAL
MMC: 820
DESCRIPTION:
This MMC is used to assign the system link ID for Q-sig and VoIP networking. In
addition each Link ID is also associated with the IP address of the MCP card for that
system for use when IP networking is used to connect to that system.
OPTION
LINK ID
SIGNAL G/W
IP TYPE
PROGRAM KEYS
UP & DOWN
KEYPAD
SPEAKER
HOLD
ACTION
1. Press TRANSFER 820.
Display shows.
2. Press UP or DOWN to select system.
3. Press RIGHT soft key twice to move cursor to
entry field. Enter SYS LINK ID for each
networked system.
4. Press RIGHT soft key twice to move cursor to
option field.
Press UP to select SIGNAL G/W networked
system.
ASSIGN SYSTEM LINK ID
DESCRIPTION
System ID used for networking. Unique ID is assigned for each
node in the network. Note: "Node" refers to the OfficeServ 7000
Series in the network.
IP address for each node in the network. The IP address assigned
to the MCP in MMC 830 is used.
Public or private type is assigned to each node for 'SELF'. The IP
TYPE assigned in MMC 830 is applied.
Used to scroll through options
Used to enter selections
Used to store data and advance to next MMC
Used to delete an entry
PROGRAMMING
PART 2 APRIL 2007
DISPLAY
SELF: LINK ID
SYS05: LINK ID
SYS05: LINK ID
006
SYS05:SIGNAL G/W