Monitoring Status - Mitsubishi Electric AE-200A Instruction Book

2-6-2. Monitoring Status

In [Monitoring Status], "Outdoor Unit Status" and "Free Contact" can be checked.
[1] Outdoor Unit Status
In the Outdoor Unit Status screen, operators can check the capacity value, high pressure, and low pressure of each
outdoor unit.
Click [Monitoring Status], and then click [Outdoor Unit Status].
Note: If AE-200/AE-50/EW-50 is started up with the outdoor units turned off, outdoor unit status may not appear. In this case,
restart the AE-200/AE-50/EW-50.
Outdoor unit icon
Outdoor unit address
Item
Controller
Capacity Value
High Pressure
Low Pressure
Outdoor unit icon
Outdoor unit address
* When a communication error occurs, "--" will appear in the Capacity Value, High Pressure, and Low Pressure value fields.
* If the outdoor unit is a PUMY model of City Multi S-series, "--" will appear in the Capacity Value, High Pressure, and Low Pressure value
fields.
* If the outdoor unit does not support a capacity display, "--" will appear in the Capacity Value field.
WT07996X02
Display target outdoor units can be narrowed down by selecting a centralized controller.
The capacity value of the compressor on a given outdoor unit will appear.
Note: The capacity value of a sub outdoor unit will not appear.
Refrigerant discharge pressure of the compressor on a given outdoor unit will appear.
Refrigerant suction pressure of the compressor on a given outdoor unit will appear.
: Normal
: Communication error or unit error
The centralized controller No. and address of the outdoor unit will appear.
Note: For address display, refer to 4 "Name Display" in Chapter 1.
91
Description
Controller
Click to narrow down the
outdoor units to display into
centralized controller units.
High pressure
Low pressure
Capacity Value