Item
Display range
Select [Block], [Group], [Address], or [Energy management block] to display its data.
Select a centralized controller, and then select a block, group, address, or energy management block to
display its data.
Out of the units that are under the control of the centralized controller selected in [Centralized controller
selection], only the blocks and energy management blocks to which the unit groups managed by tenant
managers belong are displayed.
Display target
WT07996X02
Centralized controller
Display target selection
Target group selection
Note: When the display range is [Address], unit addresses are displayed. Names cannot be registered.
Note: When the name has not been registered, the display varies with the display range setting as follows.
Display range
Block
Group
Energy management block
*1 For AE No., refer to 4 "Name Display" in Chapter 1.
Note: Blocks and groups of DIDO controllers (PAC-YG66DCA) are not displayed.
Note: To display input values of a built-in Pulse Input (PI), select the first option [Metering device] in the
target address selection screen.
Description
Target block selection
selection
Target address selection
"Block" + AE No.
*1
+ Block number
"Group" + AE No.
+ Group number
*1
"Energy mgmt block" + AE No.
48
Target energy management
block selection
Name display
*1
+ Energy management block number