Mitsubishi Electric AE-200A Instruction Book page 170

Item
Touch [ON] or [OFF] to turn on or off the units.
ON/OFF
Touch
Touch
Operation mode
Touch
Depending on settings values resulting from restrictions by device functions and set temperature range
restriction functions, temperature settings ranges may be restricted.
Set temperature
Touch
Air Direction
Touch
Fan Speed
Click
Filter Sign Reset
To reset, display a checkmark (
Touch [ON] or [OFF] to turn on or off the interlocked LOSSNAY units (ventilator).
Interlocked
LOSSNAY ON/
OFF
Fan speed of Touch
interlocked
LOSSNAY
Other operation
Operation status other than the operation items will appear.
status information
Operation prohibition mark
Operation
remote controllers.
prohibition mark
Send Touch
Cancel
Touch
WT07996X02
Note: Switching this setting will turn on or off the LOSSNAY unit as well that is interlocked with the
operation of indoor units in the group. To turn on or off the LOSSNAY unit only, use the "Interlocked
LOSSNAY ON/OFF" switch.
to display the operation mode selection screen, and select the desired operation mode.
to return to the operation settings screen.
Note: The Setback mode can be selected on the AE-200A/AE-50A/EW-50A, but not on the
AE-200E/AE-50E/EW-50E.
or to change the set temperature.
Note: Depending on the unit model, setting in 0.5°C units and 1°C units is possible.
Note: If the indoor unit supports the dual-set-point function and when the operation mode above is set to
Auto or Setback, two set temperatures for Cool mode and Heat mode can be set.
or to adjust the air direction.
or to adjust the fan speed.
to switch between resetting and not resetting the filter sign.
Note: If a filter sign in the group has not been triggered, then this item will not appear.
Note: For a group that is not connected to an interlocked LOSSNAY unit (ventilator), this item will not
appear.
or to adjust the fan speed of the interlocked LOSSNAY units (ventilator).
Note: For a group that is not connected to an interlocked LOSSNAY unit (ventilator), this item will not
appear.
is displayed when one or more operation items are prohibited.
to reflect the changes and return to the group list.
to return to the group list without sending any changes.
Description
Auto
).
is displayed on the operation items that are prohibited from the local
170
Auto Swing