Download Print this page

Toshiba GR-200 Series Instruction Manual page 763

Multi functional protection ied
Hide thumbs Also See for GR-200 Series:

Advertisement

time after the entry removed from the duplicate table. The setting value also should be taken
account of the differences of the communication speeds between LANs.
Supervision
(iv)
The communication supervisor function is available in PRP and HSR. The user can have
following settings:
Setting [LineCheckInterval]: is the setting of the interval time to send supervision frames
cyclically. The user is able to choice the time among 100ms to 100,000ms, but the
setting has default 2000ms values.
Setting [SV_Dst_MACAddr]: is for a reserved multicast address '01-15-4E-00-01-xx'. By
default, '00' is set for the 'xx'. However, if conflict arises, the use can configure to
set any value between 0x00 and 0xFF for the 'xx'.
Setting [SV_VLAN_EN]: can have On setting when the supervision frame is used in VLAN.
Additionally, the user can set identification specifying the VLAN to which the
supervision frame belongs and the priority of the supervision frame. Use the
settings [SV_VLAN_ID] and [SV_VLAN_Priority]. By default, Off is set for the
[SV_LAN_EN].
Monitor
(v)
It is possible for the user to watch the communion statuses about Port A and Port B. Figure
11.2-4 shows the numbers of transferred packets via ports.
Note: For the operations, see Chapter
Note: PortA_ErrLANID and PortB_ErrLANID do not increase in HSR, because the both
can receive A-frame and B-frame.
PortA_Send: is the number of sending packets for 'LAN_A'.
PortA_Recv: is the actual number of receiving packets from 'LAN_A'.
PortA_ErrLANID: is the number of errors that receives packets coming from 'LAN_B'
PortB_Send: is the number of sending packets for 'LAN_B'.
PortB_Recv: is the actual number of receiving packets from 'LAN_B'.
PortB_ErrLANID: is the number of errors that packets coming from 'LAN_A'.
RedundantPacketNum
10:48
PortA_Send
PortA_Recv
PortA_ErrLANID 12345
PortB_Send
PortB_Recv
PortB_ErrLANID 12345
Figure 11.2-4 PRP/HSR status
User interface: Monitoring sub-menu
- 744 -
1/6
12345
12345
12345
12345
6F2T0200 (0.15)
(→ p. 865).
GRE200 (1,2)

Advertisement

loading

This manual is also suitable for:

Gre200-1Gre200-2