Drive System Maintenance; Checking The Gearbox Oil Level - Toro 02720 Operator's Manual

Drive System
Maintenance
Checking the Gearbox Oil
Level
Service Interval: Every 50 hours
Fluid type: EP 220 gear lube
1. Remove the top guard
1. Side belt guard
2. Remove the plug from the gearbox fill hole and
check the oil level
The oil should be even with the bottom of the
fill hole.
1. Gearbox fill hole
3. If it needs oil, add oil to the fill hole until it starts
to run out of the hole.
4. Install the plug in the fill hole.
5. Install the top guard
(Figure 6).
Figure 6
2. Top guard
(Figure 7).
Figure 7
(Figure 6).
g015414
g015418
9