Safety; General Safety; Cutting Unit Safety - Toro 02720 Operator's Manual

Safety

This machine has been designed in accordance with
EN 12733.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
•
Read, understand, and follow the instructions
and warnings in this Operator's Manual and on
the machine and attachments before starting the
engine.
•
Do not put your hands or feet near moving parts of
or under the machine. Keep clear of any discharge
opening.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep bystanders and children out of the operating
area. Do not allow children to operate the machine.
Allow only people who are responsible, trained,
familiar with the instructions, and physically
capable to operate the machine.
•
Stop the machine, shut off the engine, remove
the ignition key (if equipped), and wait for all
moving parts to stop before servicing, fueling, or
unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.

Cutting Unit Safety

•
The cutting unit is only a complete machine when
installed on a traction unit. Read the traction
unit Operator's Manual carefully for complete
instructions on the safe use of the machine.
•
Stop the machine, remove the key, and wait for
all moving parts to stop before inspecting the
attachment after striking an object or if there is
an abnormal vibration in the machine. Make all
necessary repairs before resuming operation.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Use only accessories, attachments, and
replacement parts approved by Toro.
, which
3