I/O Modules; Single Command, 16 Signals - ABB Relion 670 Series Communication Protocol Manual
Hide thumbs
Also See for Relion 670 Series:
- Technical manual (1432 pages) ,
- Technical reference manual (1232 pages) ,
- Applications manual (944 pages)
Table of Contents
Advertisement
Section 3
SPA operation principle
3.1.2.1
I/O modules
To read binary inputs, the SPA-addresses for the outputs of the I/O-module function block are
used, that is, the addresses for BI1 – BI16. For SPA addresses, refer to section Related
documents in Product Guide.
3.1.2.2
Single command, 16 signals
The IEDs can be provided with a function to receive signals either from a substation
automation system or from the local HMI. That receiving function block has 16 outputs that
can be used, for example, to control high voltage apparatuses in switchyards. For local control
functions, the local HMI can also be used.
The single command, 16 signals function consists of four function blocks: SINGLECMD:1 to
SINGLECMD:4 for 16 binary output signals each.
The signals can be individually controlled from the operator station, remote-control gateway,
or from the local HMI on the IED. For Single command, 3 signals function block, SINGLECMD:1
to SINGLECMD:3, the address is for the first output. The other outputs follow consecutively
after the first one. For example, output 7 on the SINGLECMD:2 function block has the 5O533
address.
The SPA addresses for Single command, 16 signals functions SINGLECMD:1 to SINGLECMD:4
are found in table 2.
Table 2:
Function block
SINGLECMD1-Cmd1
SINGLECMD1-Cmd2
SINGLECMD1-Cmd3
SINGLECMD1-Cmd4
SINGLECMD1-Cmd5
SINGLECMD1-Cmd6
SINGLECMD1-Cmd7
SINGLECMD1-Cmd8
SINGLECMD1-Cmd9
SINGLECMD1-Cmd10
SINGLECMD1-Cmd11
SINGLECMD1-Cmd12
SINGLECMD1-Cmdt13
SINGLECMD1-Cmd14
SINGLECMD1-Cmd15
SINGLECMD1-Cmd16
SINGLECMD2-Cmd1
SINGLECMD2-Cmd2
SINGLECMD2-Cmdt3
SINGLECMD2-Cmd4
SINGLECMD2-Cmd5
SINGLECMD2-Cmd6
Table continues on next page
12
SPA addresses for SINGLECMD function
SPA address CMD Input
4-S-4639
4-S-4640
4-S-4641
4-S-4642
4-S-4643
4-S-4644
4-S-4645
4-S-4646
4-S-4647
4-S-4648
4-S-4649
4-S-4650
4-S-4651
4-S-4652
4-S-4653
4-S-4654
4-S-4672
4-S-4673
4-S-4674
4-S-4675
4-S-4676
4-S-4677
© Copyright 2017 ABB. All rights reserved
SPA address CMD output
5-O-511
5-O-512
5-O-513
5-O-514
5-O-515
5-O-516
5-O-517
5-O-518
5-O-519
5-O-520
5-O-521
5-O-522
5-O-523
5-O-524
5-O-525
5-O-526
5-O-527
5-O-528
5-O-529
5-O-530
5-O-531
5-O-532
Communication protocol manual
1MRK 511 396-UEN E
M11880-16 v4
M11880-35 v1
M11880-51 v5
SPA, 670 series
Advertisement
Table of Contents
