mdrDevRst
This function resets bit devices.
■ Format
short mdrDevRst(long lPath, short sRoute, long lNetNo, long lIoNo, long lStNo, short sCPU, long lDevType, long lDevNo)
■ Argument
Argument
lPath
sRoute
lNetNo
lIoNo
lStNo
sCPU
lDevType
lDevNo
■ Description
• This function resets (turns OFF) the bit device of the module specified to the network number (lNetNo),the start I/O number
(lIoNo),the station number (lStNo), the CPU number (sCPU),the device type (lDevType),and the device number (lDevNo).
• The mdrDevRst function is dedicated function for bit devices such as link relay (B) and internal relay (M).
■ Return value
Return value
0 (0000H)
Other than 0 (0000H)
■ Relevant function
Page 82 mdrClose
Page 85 mdrDevSet
Page 90 mdrOpen
3 DETAILS OF FUNCTION
84
3.2 MELSEC iQ-R Series Data Link Functions
Name
Path of channel
Access route
Network number
Start I/O number
Station number
CPU number
Device type
Device number
Description
Normal
Error
For details on the error, refer to the following chapter.
Page 108 ERROR CODE LIST
Description
Specify the path of the opened channel.
Specify the access route to target module.
• 0: CC-Link IE Controller Network
• 1: CC-Link IE Field Network
• 2: MELSECNET/H
• 3: CC-Link
• 4: Bus interface
Specify the network number of target module.
Page 14 Argument specification
Specify the start I/O number divided by 16 of the target module.
Page 14 Argument specification
Specify the station number of target module.
Page 14 Argument specification
Specify the CPU number of the target CPU module.
• 0: Control CPU specification
• 1 to 4: Multiple CPU specification
Specify the device type of bit device.
Page 14 Argument specification
Specify the device number of bit device.
IN/OUT
IN
IN
IN
IN
IN
IN
IN
IN