AnyCubic Kobra Go User Manual page 26

6. Print offline and online
There are two operational modes for Anycubic Kobra Go: print offline and print
online.
• Print offline: Insert memory card into the memory card slot, click on the Home
Menu "Print" to enter the file list, and print a selected file (GCode files ONLY).
• Print online: Install CH340 driver to bridge PC and machine, and install Cura for
slicing and control the machine to print via data cable.
Anycubic Kobra
Go
It is suggested to use Print Offline mode to minimize the noisy signal via data
cable.
l Print offline (Recommended)
After slicing, click Save to File in the bottom right corner. Save the GCode file to
the memory card, and then insert the memory card to the printer and control via
the touch screen for offline printing.
* GCode file name should only contain English letters, underscore and space. File
name contains special characters could not be recognized by the printer. In order
to let the printer better recognize the GCode file in the memory card, you need to
back up all the files in the memory card to the computer, and keep the memory
card only for the GCode file. Please save all the GCode files in root directory of the
memory card.
Introduction to slicing software
Print offline
Print online
Insert memory card
Install Cura, PC control
via data cable
26